紫外线固化胶 H600-S 产品说明书（中英文对照）

一、产品说明（Product Description）

H600-S 是一种单组份紫外线固化胶，适用于大部分材料之粘接，如各类塑胶、玻璃、金属、陶瓷；对PC、PMMA、ABS、PVC、PP等难粘材料具有极佳之粘附力。常温储存稳定，固化速度快，固化物表面光亮不粘，固化胶膜柔软，抗冲击性强，抗湿热及化学品优良，透明性好，优越的电气特性，绝缘防水防潮防尘等。（English: H600-S is a one-component UV-curable adhesive, suitable for bonding most materials, such as various plastics, glass, metals, ceramics; it has excellent adhesion to difficult-to-bond materials such as PC, PMMA, ABS, PVC, PP, etc. It is stable in storage at room temperature, fast in curing speed, bright and non-sticky surface of the cured product, soft cured film, strong impact resistance, excellent resistance to damp heat and chemicals, good transparency, superior electrical properties, insulation, waterproof, moisture-proof, dust-proof, etc.）

二、化学物质类型及物性（Chemical Substance Type and Physical Properties）

三、固化性能（Curing Performance）

H600-S在空气环境下需要足够的紫外线能量辐射才能够固化。固化速率和固化效果需要足够的光能量，主要是200-400nm紫外光，推荐使用365nm紫外光源。（English: H600-S requires sufficient ultraviolet energy radiation to cure in an air environment. The curing rate and curing effect require sufficient light energy, mainly 200-400nm ultraviolet light. It is recommended to use 365nm ultraviolet light source.）

四、照射条件（Irradiation Conditions）

500-1000W高压汞灯,主要波长365nm；固化条件 600mj/cm²（English: 500-1000W high-pressure mercury lamp, main wavelength 365nm; curing condition 600mj/cm²）

定位：1-2秒，固化5-10秒（具体固化依所使用的光源、胶膜厚度及被粘材料测试为准）（English: Positioning: 1-2 seconds, curing: 5-10 seconds (specific curing is subject to the test of the light source used, adhesive film thickness and bonded materials)）

五、固化物性能（Cured Product Properties）