H907-B吸尘不干胶, 电源继电器防锡渣消异响胶, 耐高温150℃高粘性密封固定胶, 汽车电子元器件专用

一、概说（Overview）

H907-B系溶剂型单组份含环氧树脂产品, 本品之操做方便，专用于电子变压器、充电器、电子继电器、电器、机电产品等电子元器件之吸尘、保护，在常温下固化，固化后呈软性、有粘性，可吸附进入电子器件中的小杂质、锡渣、异物等。（English: H907-B is a solvent-based one-component product containing epoxy resin. It is easy to operate, specially used for dust absorption and protection of electronic components such as electronic transformers, chargers, electronic relays, electrical appliances and electromechanical products. It cures at room temperature, and becomes soft and sticky after curing, which can absorb small impurities, tin dross, foreign objects, etc. entering electronic devices.）

二、物性（Physical Properties）

三、固化条件（Curing Conditions）

常温2-4小时基本固化，24小时完全固化（English: Basic curing at room temperature for 2-4 hours, full curing for 24 hours.）

四、使用及注意（Usage and Precautions）

1. 点胶部位应保持清洁、干燥；批量使用前应先小量试用以了解胶水固化要及特性要求；（English: The dispensing part should be kept clean and dry; a small amount of trial use should be carried out before mass use to understand the curing requirements and characteristic requirements of the adhesive.）

2. 作业场所应保持阴凉通风，因个人体质及环境变化问题，个别人员在接触胶水后会出现过敏情况对此建议对胶水易过敏的人员尽量少接触，其它人员也应作好相应防护； 接触胶水后应及时用酒精或清水冲洗，情况严重的应及时就医；（English: The workplace should be cool and well-ventilated. Due to personal physical fitness and environmental changes, some personnel may experience allergies after contacting the adhesive. It is recommended that personnel who are prone to allergies to the adhesive should minimize contact, and other personnel should also take corresponding protection; rinse with alcohol or clean water in time after contacting the adhesive, and seek medical attention in severe cases.）

3. 本产品含有挥发性溶剂成份，应注意人员防护；（English: This product contains volatile solvent components, so personnel protection should be paid attention to.）

4. 存放时间较长的胶水（保质期内），用前先充分搅拌均匀后再使用；（English: For glue stored for a long time (within the shelf life), stir it fully before use.）

5. 保质期外的胶水如需继续使用应先进行测试，在能够满足实际使用要求的情况下方可继续使用；（English: If the glue beyond the shelf life needs to be used continuously, it should be tested first, and can be used continuously only if it can meet the actual use requirements.）

6. 胶水不能同其它溶剂或液体混用，以免产生不可预知的产品问题；（English: The glue cannot be mixed with other solvents or liquids to avoid unpredictable product problems.）

7. 胶水应存放在阴凉通风处，严格密封保存，避开火源及高温环境，开盖未用完的胶水应及时密封，以免粘度升高造成使用不便；（English: The glue should be stored in a cool and well-ventilated place, strictly sealed, away from fire sources and high-temperature environments. The glue that has not been used after opening should be sealed in time to avoid inconvenience caused by increased viscosity.）